Illustration of use
Adding Sea Foam Motor Treatment to your motorcycle sled fuel system year-round will help.
- Stabilizes fuel conditions by preventing the formation of petroleum fouling and oil stains
- Clean carburetor/fuel nozzle and combustion chamber areas of hydrocarbon residues and deposits
- Lubricates the air inlet and upper cylinder to prevent long-term wear and corrosion
- Preserves ignition gas for easier engine starting
Maintenance Tips.
- Sea Foam in the tank cleans and lubricates the entire fuel system at all times
- Deep Creep (low V.O.C.) and Sea Foam Spray provide high temperature lubrication capability, breakable metal surface tension (creep along the metal), corrosion and evaporation resistance, and maintenance and protection of seals
- Engine Type. All two-stroke and four-stroke motorcycle sled engines
- Products. Sea Foam Motor Treatment, Sea Foam Spray, Deep Creep
- Product Number. SF16CN, SS14CN, DC14CN
- Quantity. 1 can each
Storage of two-stroke and four-stroke motorcycle sled gasoline engines
Stabilization of fuel in the tank
Sea Foam Motor Treatment prevents the formation of dirt and oil stains, adding protective lubrication to the entire fuel system during seasonal storage.
- Add at least 1 ounce of Sea Foam per gallon of tank fuel.
- Allow the engine to run long enough for Sea Foam to act on the entire fuel system.
- Where possible, adding more Sea Foam when the fuel tank is low will improve the cleanliness and lubrication ratio when handling the engine. After preparing the upper engine area for storage work, the tank can be filled with fuel at any time.
Atomized/Lubricated Gasoline Inlet
With the engine started, insert the Sea Foam Spray hose (cut to desired length) into the intake pipe (carburetor) or spray directly in front of the open throttle (fuel injection). Spray 3 to 5 times in a row, then spray one last time while shutting off the engine.
Lubrication of cylinders
After misting the air intake, allow the engine to cool and remove the spark plugs. Insert the Deep Creep cleaning tubes into each cylinder chamber and spray. Before reinserting the spark plugs, rotate the piston by turning the engine with the crankshaft (turn with a tool, pull with a rope). Note: Deep Creep and Sea Foam Spray can be used interchangeably for combustion chamber lubrication.
Other
Sea Foam Motor Treatment contains only petroleum-based ingredients and is safe for use in all types of powered outdoor engines and fuel systems. Contains no harsh detergents or abrasive chemicals.